Solutions for
Perfect Thermal Management

Heaters

HG 140 | 15W – 150W

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.

To HG 140 | 15W - 150W

HGK 047 | 10W – 30W

Due to fluctuating temperatures, condensation can form in enclosures. This can lead to serious malfunctions or, worst case, to component failure. Convection heaters protect against low temperatures, thus preventing the formation of condensation. Furthermore, fan heaters provide air circulation and ensure constant temperatures in enclosures.

To HGK 047 | 10W - 30W

RCE 016 | 5W – 9W

Due to fluctuating temperatures, condensation can form in enclosures. This can lead to serious malfunctions or, worst case, to component failure. Convection heaters protect against low temperatures, thus preventing the formation of condensation.

To RCE 016 | 5W - 9W

RC 016 | 8W – 13W

These RC 016 Series are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

To RC 016 | 8W - 13W

CSK 060 | 10W – 20W

The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design.

To CSK 060 | 10W - 20W

CS/CSF 060 | 50W – 150W

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring (CSF 060).

To CS/CSF 060 | 50W - 150W

Fan Heaters

HV/HVL 031 | 100W – 400W

The compact HVL 031 high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. For large OEM use, this fan heater can also be provided without the fan, in which case the OEM/customer must provide a fan which meets the minimum airflow requirements.

To HV/HVL 031 | 100W - 400W

HGL 046 | 250W – 400W

The compact HGL 046 fan heater prevents formation of condensation. The integrated high performance axial fan provides forced air circulation and so guarantees an even temperature in enclosures. The heater is wired using the internal terminal connectors.

To HGL 046 | 250W - 400W

CS/CSL 028 | 150W – 400W

The CS 028 fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. The heater is connected using the internal terminal connectors. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The small size of the CS 028 make it ideal for use in enclosures where space is at a premium.

To CS/CSL 028 | 150W - 400W

CR 027 | 550W – 650W

The semiconductor CR 027 fan heater prevents the formation of condensation and ensures an even temperature in enclosures. The integrated thermostat is used to set the desired temperature while the high performance axial fan provides forced air circulation. The CR 027 is also available with a continuously running fan (when powered).

To CR 027 | 550W - 650W

CR 030 /CR 130 | 950W

The compact CR 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an integrated thermostat for temperature control or a pre-set hygrostat for humidity control. The CR 030 was designed as a stationary unit for the bottom of the enclosure. For panel or DIN rail mount, the CR 130 fan heater is recommended.

To CR 030 /CR 130 | 950W

CS 030 /CS 130 | 1200W

The compact CS 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an optional integrated thermostat for temperature control. The CS 030 was designed as a stationary unit for the bottom of the enclosure. For panel or DIN rail mount, the CS 130 fan heater is recommended.

To CS 030 /CS 130 | 1200W