Solutions for
Perfect Thermal Management

HG 140 | 15W – 150W

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.

To HG 140 | 15W - 150W

HGK 047 | 10W – 30W

Due to fluctuating temperatures, condensation can form in enclosures. This can lead to serious malfunctions or, worst case, to component failure. Convection heaters protect against low temperatures, thus preventing the formation of condensation. Furthermore, fan heaters provide air circulation and ensure constant temperatures in enclosures.

To HGK 047 | 10W - 30W

RCE 016 | 5W – 9W

Due to fluctuating temperatures, condensation can form in enclosures. This can lead to serious malfunctions or, worst case, to component failure. Convection heaters protect against low temperatures, thus preventing the formation of condensation.

To RCE 016 | 5W - 9W

RC 016 | 8W – 13W

These RC 016 Series are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

To RC 016 | 8W - 13W

CSK 060 | 10W – 20W

The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design.

To CSK 060 | 10W - 20W

CS/CSF 060 | 50W – 150W

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring (CSF 060).

To CS/CSF 060 | 50W - 150W