In electronics, a switch is an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another. The most familiar form of switch is a manually operated electromechanical device with one or more sets of electrical contacts. Each set of contacts can be in one of two states: either ‘closed’ meaning the contacts are touching and electricity can flow between them, or ‘open’, meaning the contacts are separated and nonconducting.
A DIP switch is a set of manual electric switches that are packaged in a group in a standard dual in-line package (DIP) (the whole package unit may also be referred to as a DIP switch in the singular).
Foot Switch/ Pedal Switch
TZ-8 Limit Switch
CSA Limit Switch
CZ-3 Compact Prewired Limit Switch
TZ-6 Sealed Limit Switch
CHL Limit Switch
CWL Limit Switch
CLS Limit Switch
CS Micro Switch
CM Micro Switch
CZ Micro Switch
A micro switch, also known as snap-action switch, is a generic term used to refer to an electric switch that is actuated by very little physical force, through the use of a tipping-point mechanism. They are very common due to their low cost and durability, greater than 1 million cycles and up to 10 million cycles for heavy duty models. This durability is a natural consequence of the design.
Rotary Switch / Cam Switch
LW26GS Series Pad-lock Type Switch
LW26S Series Key-lock type Switch
LW30 Rotary Switch
Safety Key Interlock Switch
CZ-93 Safety Key Interlock Switch
Safety key interlock switches operate by detecting the opening of guards such as doors and gates. When the gate is open and the safety interlock is disengaged, its positive opening contacts shut down, Safety key interlock switches are available in any of three retention forces: 7 lbs.